Author 
Message 
mparisi
Posted on: Fri May 20, 2011 2:59 am
Posts: 93 Joined: Sat May 14, 2011 1:08 am

Re: Subtraction and Division with 3 or more squares
sneaklyfox wrote: Can't have two or more zeros in a cage? Ok, maybe I forgot. I just thought maybe that had happened. Maybe it was 0x. Yes, I remember a 0x with two zeros in it.




sneaklyfox
Posted on: Fri May 20, 2011 3:24 am
Posts: 422 Location: Canada Joined: Fri May 13, 2011 2:43 am

Re: Subtraction and Division with 3 or more squares
mparisi wrote: sneaklyfox wrote: Can't have two or more zeros in a cage? Ok, maybe I forgot. I just thought maybe that had happened. Maybe it was 0x. Yes, I remember a 0x with two zeros in it. Yes, of course you can have two or more zeros in a 0x cage. But I think pnm said you can't have two or more zeros in a 0: cage which was different than I remembered. But as he's the one who wrote the program, I have to assume that I remembered incorrectly.




duffifi
Posted on: Sun May 29, 2011 1:05 pm
Posts: 4 Joined: Sat May 21, 2011 9:47 pm

Re: Subtraction and Division with 3 or more squares
If I'm not mistaken, no one has yet given the rule which actually applies to all four arithmetic operations: iterate the binary operation by consistently applying brackets to the left. So it's (xy)z, ((xy)z)w, and (x/y)/z. (This is of course correct but superfluous in the case of addition and multiplication.)




sneaklyfox
Posted on: Sun May 29, 2011 9:02 pm
Posts: 422 Location: Canada Joined: Fri May 13, 2011 2:43 am

Re: Subtraction and Division with 3 or more squares
duffifi wrote: If I'm not mistaken, no one has yet given the rule which actually applies to all four arithmetic operations: iterate the binary operation by consistently applying brackets to the left. So it's (xy)z, ((xy)z)w, and (x/y)/z. (This is of course correct but superfluous in the case of addition and multiplication.) What about for exponentiation? I think I've come across x^(y^z).




duffifi
Posted on: Mon May 30, 2011 6:07 am
Posts: 4 Joined: Sat May 21, 2011 9:47 pm

Re: Subtraction and Division with 3 or more squares
@sneakly fox: I believe you are correct on both counts, and that rule for bracketing is meant to be implied by the accompanying explanation below puzzles which include exponentiation. In case it wasn't clear, my rule 'bracket to the left' was intended to apply only to +, , x, and : .
@Patrick: do you think it would be worthwhile to make mention of which way the brackets are associated in the case of nonassociative operations? I recall being puzzled myself when I first saw this, and the rule I settled on was, I thought, the clearest way to resolve the ambiguity without the need for casesplitting.




pnm
Posted on: Mon May 30, 2011 12:55 pm
Posts: 2192 Joined: Thu May 12, 2011 11:58 pm

Re: Subtraction and Division with 3 or more squares
duffifi wrote: @Patrick: do you think it would be worthwhile to make mention of which way the brackets are associated in the case of nonassociative operations? I recall being puzzled myself when I first saw this, and the rule I settled on was, I thought, the clearest way to resolve the ambiguity without the need for casesplitting. Yes, for  and / the rule is: apply left to right (no need to use/mention brackets really). For exponentiation the rule _was_ the same, until someone pointed out that generally for three numbers: first y^z is computed, and then x ^ (y^z). (which can also be inferred from the example at the bottom of the page: "Or, with three digits: 2^4^2 = 2^16 = 65536") Patrick




duffifi
Posted on: Mon May 30, 2011 2:07 pm
Posts: 4 Joined: Sat May 21, 2011 9:47 pm

Re: Subtraction and Division with 3 or more squares
Aside: of course, this way of associating iterated exponentials is the standard convention in mathematics, reason being that with the other way (x^y)^z, you could simply use (x^y)^z = x^(yz) to reduce the size of the exponential stack. (It is common to think of exponentiation as a higherorder operation, and the 'true' height of the exponential stack is used to reflect just how high the order is. I guess I could go on about this, at the risk of derailing the discussion.)




pnm
Posted on: Mon May 30, 2011 2:11 pm
Posts: 2192 Joined: Thu May 12, 2011 11:58 pm

Re: Subtraction and Division with 3 or more squares
duffifi wrote: Aside: of course, this way of associating iterated exponentials is the standard convention in mathematics, reason being that with the other way (x^y)^z, you could simply use (x^y)^z = x^(yz) to reduce the size of the exponential stack. (It is common to think of exponentiation as a higherorder operation, and the 'true' height of the exponential stack is used to reflect just how high the order is. I guess I could go on about this, at the risk of derailing the discussion.) Maybe start a new topic




maartensmit
Posted on: Thu Jun 02, 2011 2:00 pm
Posts: 20 Joined: Mon May 16, 2011 7:17 pm

Re: Subtraction and Division with 3 or more squares
Just to be entirely sure about this, modulo operators don't have any particular order, right?
So 5 and 7 in a cage could be either 2mod or 5mod?
_________________ Confucius say  'He who stands on toilet is high on pot.'




pnm
Posted on: Thu Jun 02, 2011 2:09 pm
Posts: 2192 Joined: Thu May 12, 2011 11:58 pm

Re: Subtraction and Division with 3 or more squares
maartensmit wrote: Just to be entirely sure about this, modulo operators don't have any particular order, right? So 5 and 7 in a cage could be either 2mod or 5mod? Yes, absolutely, the same rule as for the other operators.




